The best way to Test a Battery Charger

by:AGM lithium battery     2020-07-21
Testing your battery charger cannot only help you troubleshoot issues with your electronic device, but can ensure a particular battery charge, and increase the longevity of your battery. Testing your charger is easy, but remember to work safely.
Tools and Materials Needed
* Outlet
* Charger
* Camera with battery to be tested
* Multimeter or receptacle tester
Step 1 - Safely Using Your Multimeter
An important part of a multimeter or receptacle tester is safety. Overloading a multimeter or setting it into the wrong settings can cause immediate harm on the multimeter and even cause a surge of gadget. To safely test an outlet you do have a category III (for experience appliance outlets) multimeter. Categories are in accordance with the CEN EN61010 standard. Receptacle testers really should be handled with think. They can even be overloaded along with the user should be careful to be able to touch 1 of the prongs when testing an wall plug.
Step 2 - Ensure Outlet Is Working Properly
For a multimeter: First, set the multimeter by attaching pointed probes and turning for a multimeter and setting it to the AC Volts setting. Then insert the probes into the two vertical slots using the outlet, don't forget that type B (NEMA 5-15 or North American standard) outlets have the neutral slot on the left as well as the live slot on the right, inside addition to a grounded slot leading or bottom. If your multimeter reads 110 - 120 volts then, your outlet is properly working. If this will not read 110 - 120 volts then, locate a new outlet and repeat step 1 . 5.
For a receptacle tester: Insert your receptacle tester into design . B (NEMA 5-15 or North American standard) outlet. If the tester indicates a suitably working outlet, then in order to step 7. If your tester indicates a broken or faulty outlet, then look for a new outlet and repeat step 2.
Step 3 - Insert Battery Charger into Outlet
Check the charger's prongs. If the any prongs are missing, or the prongs are bent the charger always be replaced or fixed by professional. Also, make there are no breaks associated with wire as well as wire's protective plastic coating. If the wire is broken or any plastic covering is missing do not plug in charger. Contain it replaced or fixed by a professional.
Step 4 - Connect Device to Battery Charger
Connect your battery charger to the electrical device's power interface. If the device is receiving a charge, the battery charger is functioning clearly. If you're confident whether or not your system is receiving a charge, consult the owner's manual for indications of charging (LED signals, powering on when connecting in order to some power source, audio signal etc.). If your device is not receiving an electric power charge then, it needs to get replaced or repaired by an experienced guitarist.
http://www.prohometips.com/ This web page facilitate with home improvement,home repair,extreme home makeover,home improvement site,HGTV,DIY,do-it-yourself,buying guides,consumer reports ,Free home improvement advice, great remodeling tips, and appliance buying guides by leading home improvement authority, DIY expert and HGTV personality
For furhter details about battery, easily test, troubleshoot visit our website: http://www.prohometips.com/
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...