Simple and quick instructions on using a car battery
by：AGM lithium battery2020-07-19
I am sure everyone at one time and therefore other has left the top lights or some other electrical device on and drained your car battery. You may not need to run out and purchase a new battery. A motorcar battery charger can save the day. They are relatively simple to use and operate. Just follow these simple steps and very soon your car will back to normal. 1)First, remove the battery cables from the terminal posts. Remember to material (-) negative cable preliminary. (This cable is usually black) and then the (+) positive cable. Bear in mind that all your stereo settings will probably be lost when the power is cut off. 2)Now you are prepared to hook up the car battery charger to your automobile. But first, read the owner's manual and insure that the model charger you are using is suitable for your automobile. Now, hook the (+) positive cable (red) to the positive terminal and then the (-) negative cable (black) on the negative terminal. 3)Now plug in the car battery charger and switch it on. Al light or some other indicator should turn on. (Consult your owner's manual) 4)Wait for another indicator to come on showing that the charge is done. Remove the cables starting with the (-) negative cable (black) first and reconnect your battery. If your car still fails to crank up, you may have to a new battery or there may be another serious problem.